Archive for the ‘Spindle Repair’ Category

Omlat Spindle Repair

Saturday, March 26th, 2011

omlat spintle Omlat Spindle Repair

We are currently rebuilding a water cooled 24,000 RPM  Omlat spindle from a Multicam CNC router.  After inspection our spindle technician will replace the bearings. The spindle was damaged in route so we are also rewiring a 12 pin electrical connector. When we are done repairing the spindle it will be sent to Thailand.

Do you need a spindle repair or rebuild on an Omlat CNC machine?

Visit for more information.


Colombo Spindle Repair – Spindle Rebuild

Friday, December 31st, 2010

We recently received a call from a new customer in the great North West. He had a router with a Colombo spindle problem.  The nose of the spindle had been damaged only leaving three threads on the spindle shaft.

colombo spindle Colombo Spindle Repair   Spindle Rebuild

I felt certain we could repair the spindle at our Los Angeles offices. We discussed the time frames required to ship, rebuild and return the spindle it to his facility.  At that time we offered him a solution to his spindle problem which would cost less and be done locally .

Our goal is to find the best spindle repair solution and to keep your facility in production. Please feel free to give us a call if your in need of a spindle repair. The problem may not be as bad as you think.

FADAL – Spindle Repair & CNC Service

Sunday, December 12th, 2010

fadal 12 12 2010 7 10 29 PM FADAL   Spindle Repair & CNC Service

TD Spindle Repair is here to support your manufacturing facility.  If your Fadal spindle is not running properly one of our spindle technicians is available to help. Sometimes we can help service  your spindle over the phone, in Southern California we can come to your shop or you can always ship the spindle to us .

We offer service on most spindle models : 7,500 RPM grease pack, 10,000 RPM grease pack or air/oil or mist lube, 15,000 RPM air/oil or mist pack with ceramic bearings.

TD Spindle Repair’s only  goal is to get your machine running.                              Fadal VMC 4020 CNC Machining R165

Financing for Spindle Repairs

Thursday, June 3rd, 2010

TD Spindle Repair is happy to announce a two year finance program. This is a program designed to help during these challenging times. If your repair is going to cost over Five Thousand dollars one of our quipment financing professionals will work with you to see
if we can put together a finance progam that will fit your needs.

TD Spindle Repair will always work to provide you the best service possible.