Manual 4 Axis Cutting — a complete 10 x 6 system !!!

The main benefit of a four axis cutting head is to compensate taper, and to make the finished it completely vertical through the fourth axis. This specially engineered cutting head has perform remote markedly in many cutting feels and reducing the processing cost of increased operating efficiency. It has a maximum limit of 4 degree angle with the rotational accuracy of 0.01 degrees.
For taper compensation, the distance between the cutting head and the surface of the work piece must be maintained with high accuracy. The height positioning accuracy of the four axis is 0.01 mm positioning cutting accuracy. 0.1 mm, which can easily meet various cutting requirements.
In the marble matching process, water jet cutting with a four axis cutting head design is simply amazing. When the angle of the cutting head reaches 4 degrees, the finished edge shows tremendous improvement. As can be seen from this picture, there is no gap between the two joint services. Hence a secondary polishing procedure is no longer required. Thereby, it increases working efficiency and reduces the production cost.

With this improved four axis dynamic cutting head design. Marble matching is no longer a difficult technique. It has made the traditionally complex marble matching an easy job.

The same methodology is also applicable in glass straight hole drilling. As an example, when piercing holes in the glass. It is not necessary to decrease the cutting speed in order to get straight holes. The ideal effect can be achieved without changing cutting speed, and that is highly beneficial!